Websites and locations

Tech Tips: Are your customers or suppliers switching to R-32? This is what you should expect to see in the field.

Are your customers or suppliers switching to R-32? This is what you should expect to see in the field.

 

It’s no secret that OEMs are contemplating the switch to R-32. Companies like Daikin have already made the move from R-410A. Here are 4 things to know about R-32 in the field.

 

  1. New labels - While it will look similar to R-410A, the primary visual difference between R-32 and R-410A systems will be the flammable labeling.
  2. Ratings on the compressor - The compressors rating will depend on the charge amount. A refrigerant detector could be located within the unit. 
  3. Detailed installation guidelines – These will be supplied by the Original Equipment Manufacturer (OEM) and must be followed very closely by the installation technician.
  4. Smaller system - It is possible the system will be physically smaller than a comparable R-410A system due to R-32’s increased capacity over the legacy refrigerant.

Have questions about R-32? Visit our Forane R-32 page or contact a member of our team.

 

Forane is registered trademark of Arkema.

Please consult Arkema’s disclaimer regarding the use of Arkema’s products on: https://www.arkema.com/global/en/products/product-safety/disclaimer/

Top